| Chiller Module Specifications & Features | ||||||||||||||
| K-O Concepts Models MCR - DR | ||||||||||||||
| MODEL NUMBERS | MC-DR | |||||||||||||
| Cooling Capacities¹ | Watts | 100 | 200 | |||||||||||
| BTU/hour | 340 | 680 | ||||||||||||
| Cooling Process | Compressor | All models use refrigerant based compressors. | ||||||||||||
| Refrigerant Type | R134a | All models use R134a (HFC-134a) / CFC-free. | ||||||||||||
| Heat Dissipation | ||||||||||||||
| Note: Air flows from front to back of cabinet. | Air (air cooled) | All models dissipate heat to ambient air via fan. | ||||||||||||
| Process Refrigerant Temperature Range | °C / °F | 10-30° / 50-86° | ||||||||||||
| Process Refrigerant Temperature Stability² | °C | ±0.1° | ||||||||||||
| Ambient Air Temperature Range | °C / °F | 15-30° / 59-86° | ||||||||||||
| Process Refrigerant Transfer Lines | 5/16 Inch O.D. | Standard Feature: 3-12 feet | ||||||||||||
| Process Refrigerant Connections | Rear-Panel | Standard: Hard Plumbed | ||||||||||||
| Location | Optional: Quick Disconnect | |||||||||||||
| Cold Plate | Configuration | Catalog or custom cold plates installed. | ||||||||||||
| Note: Custom cold plate shown. | ||||||||||||||
| Input Power Requirements / Selectable | Volts AC | AC Mains: 90-264 VAC / 1Ų / 50-60 Hz | ||||||||||||
| Dual Mains: Universal AC or 24-28 VDC | Volts DC | DC Mains: 24 or 28 VDC | ||||||||||||
| Optional Input Power | Volts DC | DC Mains: 24 or 28 VDC | ||||||||||||
| Single Mains: 24 or 28 VDC | ||||||||||||||
| Full Load Amperage (typical AC Mains) | Amps @ | |||||||||||||
| Note: Typical line current @ 60 Hz. | 117 / 230 VAC | 1.0 / 0.5 | 1.4 / 0.7 | |||||||||||
| Amps @ | ||||||||||||||
| 24 VDC | 4.0 | 6.0 | ||||||||||||
| Circuit Breaker | SPST | Lighted circuit breaker located on back panel. | ||||||||||||
| Weight | Dry lbs. / kg. | 9.0 - 11.5 / 4.1 - 5.2 | ||||||||||||
| Cabinet Dimensions (W x D x H) | Width: in / mm | 17.0 / 432 | ||||||||||||
| Note: Standard 19 inch rack-mount configuration, fully enclosed, w/ 3.5 inch / 5 unit (U) high front panel. | Depth: in / mm | 8.0 / 203 | ||||||||||||
| Height: in / mm | 3.42 / 87 | |||||||||||||
| Panel: in / mm | 19.0 W x 3.42 H / 482.6 W x 87 H | |||||||||||||
| Process Refrigerant Temperature Controller | Digital (PID) controller w/ dual display. | |||||||||||||
| Condenser Fan | Speed-controlled for quiet operation. | |||||||||||||
| Table-Top Model | Optional Feature: For non-rack applications. | |||||||||||||
| Notes: | ||||||||||||||
| * Cooling capacities require adequate cold plate and delta temperature between cold plate and heat load. | ||||||||||||||
| * Temperature stability performance requires a stable heat load input. | ||||||||||||||
| * Data shown is with 30°C / 86°F (unrestricted) ambient air. | ||||||||||||||
| * Specifications are subject to change without notice. | ||||||||||||||
| Page 3 of 4 | ||||||||||||||